Eibach exclusively for Motech

Motech is a well established and trusted performance tuner. They provide remaps for all modern BMWs and currently are the preferred supplier for performance software to many Audi/VW main dealers! In addition to remaps they offer other performance products like Scorpion exhausts + more...

Moderators: marco_polo, Producethis, Lambster, Rich196, motechmike

Post Reply
motechmike
Experienced Member
Experienced Member
Posts: 222
Joined: Tue Jun 02, 2009 9:18 am

Eibach exclusively for Motech

Post by motechmike » Mon Oct 31, 2016 9:36 am

There are exclusively for Motech Performance from EIbach

BMW M135i / 235i / 140i and 240i Lowering springs

6 speed manual cars and the 8 speed auto.


We fit and sell a good number number of Eibach pro kits.. Tho the kit they only offer will drop the car -20mm front and 10mm rear, some customers want to go a little lower and drop the car more even.


Working with eibach UK and have now come up with a spring kit that will drop the car 25mm and 20mm ( still it will retain the ride quality )
The first kits will be ready 1st to 2nd week of Jan .. First set will be on our demo M235I very soon.. Also the car will be on show on there stand at the 2017 Autosport show..


The springs will be black metallic with the part number , Motech and Eibach logo in BMW blue ( same as the brake calliper )


Within Eibach UK is a team of engineers responsible for all engineering activities in supporting our UK customers. This includes design for production of springs and anti-roll bars based upon known or well defined customer requirements in order to bring them to manufacture. If the spring or anti-roll design is not known by the customer but the intent of the vehicle is known then the engineers undertake vehicle measurements to establish design specifications based upon vehicle application and customer expectation of handling. Such designs can be made to rest within or outside the scope of TuV approval. Eibach UK can source validated spring and anti-roll bar prototypes for customers to evaluate the design intent prior to production order. This route is commonly adopted by aftermarket private label customers, vehicle armourers, motorsport customer in F1 and BTCC. Due to the short lead time of Eibach UK prototyping, this route is also favoured by our OE customers who typically request UK sourced prototyping in the initial stages of a project build before further development using factory made parts. As UK customer projects mature toward volume production the Eibach UK engineering can support the customer with the anticipated requirement for rigorous Quality documentation, providing dimensional inspection reports, certificate of conformances and full automotive PPAP

RRP is £205.00 inc vat and we can also offer fitting.


For more info or ordering a set and technical information For more info get in touch ..

info@motechperformance.co.uk
http://www.motechperformance.co.uk 
https://www.facebook.com/motechperformance



Image

14793802_1063993407061142_1630148301_n_zpscwpcxkdl.jpg.html]Image[/URL]

Image[/url]
01604 810000
07842 122467
info@motechperformance.co.uk

ECU mapping to a standard, not a price!

www.motechperformance.co.uk

Post Reply

Return to “Motech Performance Software”