E87 LCI Rear Lights - How to have the bars light up?

Fancy some Angel Eyes, want to get rid of that yellow glow, want info on LED's, got a problem with your headlights, get your answers here

Moderators: marco_polo, Producethis, Lambster, Rich196

User avatar
smith-n7
Knowledgeable Member
Knowledgeable Member
Posts: 102
Joined: Thu Mar 02, 2017 8:16 pm

Re: E87 LCI Rear Lights - How to have the bars light up?

Post by smith-n7 » Mon Jul 17, 2017 5:52 pm

supercati wrote:I did this mod yesterday, installed LCI rear lights High with LED on my E81 LCI without xenon.

I wired them to the license plate lights, but now I have the xmas tree effect...

What should I code? I can't find a clear answer on this :| .
Here you go:

Edit: Change these values below in .trc file if you have an frm1:

Image

From: http://www.e90post.com/forums/showthrea ... 5&page=126

Hope this helps.
Last edited by smith-n7 on Wed Oct 11, 2017 1:33 pm, edited 1 time in total.
24 valves, no turbo.

User avatar
supercati
Junior Member
Junior Member
Posts: 40
Joined: Fri Mar 24, 2017 10:17 am
Location: Barcelona

Re: E87 LCI Rear Lights - How to have the bars light up?

Post by supercati » Tue Jul 18, 2017 9:01 am

smith-n7 wrote:
Mon Jul 17, 2017 5:52 pm
supercati wrote:I did this mod yesterday, installed LCI rear lights High with LED on my E81 LCI without xenon.

I wired them to the license plate lights, but now I have the xmas tree effect...

What should I code? I can't find a clear answer on this :| .
Here you go:

Change to the values below in your nfrm file:

Image

From: http://www.e90post.com/forums/showthrea ... 5&page=126

Hope this helps.
For sure this helps, a lot! :) Looks like just the thing I was looking for :D.

So I will try to do code it asap, and I will post results here.
130i E81 2007 LHD - Sparkling Graphite Metallic / Boston Terra - CDV Delete - 135i ESD with resonator delete - LED Blacklines

bjt
Enthusiastic Member
Enthusiastic Member
Posts: 850
Joined: Mon Apr 14, 2014 3:12 pm

Re: E87 LCI Rear Lights - How to have the bars light up?

Post by bjt » Tue Jul 18, 2017 10:36 pm

If those don't work try these, worked for me on a FRM2

WL_NSL
nicht_aktiv (Disable rear fogs on welcome)

PWM_RL_BL_2_FKT_SL
wert_01
wert_02 (Disable rear bottom lights when sidelights on)

PWM_NSL_FKT_SL
wert_01 (Disable rear fogs when sidelights on)

DRL_TFL_MIT_KZL
aktiv (Enable plate lights & rear LED for DRL)

KALTUEBERWACHUNG_KZL
nicht_aktiv (Disable plate bulb check on cold start, prevents LED flickering)

WARMUEBERWACHUNG_KZL
nicht_aktiv (Disable plate bulb check on warm start, prevents LED flickering)
E87 130i M Sport, now with added doors!
E81 130i M Sport aka the Pocket Rocket - Fell victim to the Monday morning commute

User avatar
supercati
Junior Member
Junior Member
Posts: 40
Joined: Fri Mar 24, 2017 10:17 am
Location: Barcelona

Re: E87 LCI Rear Lights - How to have the bars light up?

Post by supercati » Sun Jul 23, 2017 2:07 pm

bjt wrote:
Tue Jul 18, 2017 10:36 pm
If those don't work try these, worked for me on a FRM2

WL_NSL
nicht_aktiv (Disable rear fogs on welcome)

PWM_RL_BL_2_FKT_SL
wert_01
wert_02 (Disable rear bottom lights when sidelights on)

PWM_NSL_FKT_SL
wert_01 (Disable rear fogs when sidelights on)

DRL_TFL_MIT_KZL
aktiv (Enable plate lights & rear LED for DRL)

KALTUEBERWACHUNG_KZL
nicht_aktiv (Disable plate bulb check on cold start, prevents LED flickering)

WARMUEBERWACHUNG_KZL
nicht_aktiv (Disable plate bulb check on warm start, prevents LED flickering)
I have FRM2, so this is what worked perfect :). Thank you very much, and thanks too to @smith-n7 :)

Before / after.

Image

Image
130i E81 2007 LHD - Sparkling Graphite Metallic / Boston Terra - CDV Delete - 135i ESD with resonator delete - LED Blacklines

Smokeyjaguar
Junior Member
Junior Member
Posts: 7
Joined: Sat Feb 20, 2016 12:57 pm
Location: scotland

Re: E87 LCI Rear Lights - How to have the bars light up?

Post by Smokeyjaguar » Tue Oct 10, 2017 11:10 pm

Just installed LCI rear lights with the LED on my 2006 e87 non xenon. is it possible to code out the halogens on FRM1?

Add +MUEB to VO in CAS and FRM? what lines do I have to change in FRM after that? bit confused with this any help would be greatly appreciated.

User avatar
smith-n7
Knowledgeable Member
Knowledgeable Member
Posts: 102
Joined: Thu Mar 02, 2017 8:16 pm

Re: E87 LCI Rear Lights - How to have the bars light up?

Post by smith-n7 » Wed Oct 11, 2017 7:25 am

Smokeyjaguar wrote:
Tue Oct 10, 2017 11:10 pm
Just installed LCI rear lights with the LED on my 2006 e87 non xenon. is it possible to code out the halogens on FRM1?

Add +MUEB to VO in CAS and FRM? what lines do I have to change in FRM after that? bit confused with this any help would be greatly appreciated.
If you scroll up to my earlier post those are the values to change in frm1. You don’t need to change the VO in CAS and FRM. Just edit the frm to those values and that is all.
24 valves, no turbo.

Smokeyjaguar
Junior Member
Junior Member
Posts: 7
Joined: Sat Feb 20, 2016 12:57 pm
Location: scotland

Re: E87 LCI Rear Lights - How to have the bars light up?

Post by Smokeyjaguar » Wed Oct 11, 2017 8:23 am

smith-n7 wrote:
Wed Oct 11, 2017 7:25 am
Smokeyjaguar wrote:
Tue Oct 10, 2017 11:10 pm
Just installed LCI rear lights with the LED on my 2006 e87 non xenon. is it possible to code out the halogens on FRM1?

Add +MUEB to VO in CAS and FRM? what lines do I have to change in FRM after that? bit confused with this any help would be greatly appreciated.
If you scroll up to my earlier post those are the values to change in frm1. You don’t need to change the VO in CAS and FRM. Just edit the frm to those values and that is all.
😳 Thanks mate i will try that later when i get home. I was looking for the lines in ncs dummy but couldn’t find them.

Smokeyjaguar
Junior Member
Junior Member
Posts: 7
Joined: Sat Feb 20, 2016 12:57 pm
Location: scotland

Re: E87 LCI Rear Lights - How to have the bars light up?

Post by Smokeyjaguar » Thu Oct 12, 2017 12:22 am

smith-n7 wrote:
Wed Oct 11, 2017 7:25 am
Smokeyjaguar wrote:
Tue Oct 10, 2017 11:10 pm
Just installed LCI rear lights with the LED on my 2006 e87 non xenon. is it possible to code out the halogens on FRM1?

Add +MUEB to VO in CAS and FRM? what lines do I have to change in FRM after that? bit confused with this any help would be greatly appreciated.
If you scroll up to my earlier post those are the values to change in frm1. You don’t need to change the VO in CAS and FRM. Just edit the frm to those values and that is all.
Thanks again smith-n7 lights are sorted now. :D

Post Reply

Return to “Interior/Exterior Lighting”