Baby BMW Forum banner

2011 e82 high darkline retrofit to low, HEEELLLPPP PLEASE

1K views 1 reply 2 participants last post by  bjt 
#1 ·
I have a 2011 e82 and I have purchased some high led dark lines and want to get them working correctly, when fitted all bulbs work as sane as my low untinted version but Celis strip doesn't light up, so I have red you can power it up taking a free from numberplate lights, if so can anyone shed some light on this and also if so how can I turn the rear of the tail bulbs off so only the celis strip lights up like it should and not the rear of the bulbs, it was so much simpler on my old 2009 model, if anyone can help it would be much appreciated.

Regards

Dan
 
#2 ·
Yep tap the number plate light.

Then you need coding using NCS or Carly etc to enable numberplate light with DRLs and disable rear side lights.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top