Drive train fault

Find out more about the BMW 1 Series F20, F21, F22 & F23
Manufactured from end of 2011

Moderators: Rich196, marco_polo, Producethis, Lambster, babybmwadmin

Post Reply
varsani1
Knowledgeable Member
Knowledgeable Member
Posts: 54
Joined: Thu Feb 18, 2016 5:26 pm

Drive train fault

Post by varsani1 » Thu Jan 11, 2018 9:41 pm

Drive trains fault appeared on the dash yesterday, ran a diagnostic using carly and found the faults listed below

0. Motor Control:
<--------------------------->
Engine / Motor:
- Fault: Electric fan no rotation
- Code: 241600
- Fault: transmissible torque is too small, heavily damaged coupling
- Code: 28F400

<===========================>
1. ABS / DSC / Brake:
<--------------------------->
Dynamische Stabilitäts Control / DSC:
ECU OK, no fault code
<===========================>
2. Heating / AC:
<--------------------------->
Air conditioning / Klimaanlage:
- ECU not present/no answer
<===========================>
3. Immobilizer System:
<--------------------------->
Body Domain Controler :
- Fault: Output terminal L defect
- Code: 804180
- Fault: Output Tfl L defect
- Code: 804184
- Fault: :Welcome Light-repeat active
- Code: 8041A8
<===========================>
4. Cruise Control:
<--------------------------->
Active cruise control / Aktive Geschwindigkeitsregelung:
- ECU not present/no answer
<===========================>
5. Systems:
<--------------------------->
Infotainment:
ECU OK, no fault code
<===========================>
6. Chassis:
<--------------------------->
Steering /Lenkung:
ECU OK, no fault code
<--------------------------->
Electronic damper / Elektronische Daempfer:
- ECU not present/no answer
<===========================>
7. Body:
<--------------------------->
Automatisches Front Steering:
- ECU not present/no answer
<--------------------------->
Rear Electronics Module / Elektronik Modul hinten:
- Fault: Output Sl L defect
- Code: 804883
- Fault: Output R S defect
- Code: 804885
<--------------------------->
Integrated Chassis Management Quer/Längsdynamik:
ECU OK, no fault code
<===========================>
8. Other:
<--------------------------->
Advanced Crash and Safety Management (ACSM):
ECU OK, no fault code
<--------------------------->
Central Gateway / zentrales Gateway:
- Fault: :Synchronization failed
- Code: CD0487
<--------------------------->
Fuel pump / Kraftstoffpumpe:
ECU OK, no fault code
<--------------------------->
ABS + DSC:
- Fault: :Because of the cost over-temperature shutdown
- Code: 801A55
<--------------------------->
Instrument cluster / Kombiinstrument:
ECU OK, no fault code
<--------------------------->
Central Control / Zentrale Bedieneinheit:
ECU OK, no fault code
<--------------------------->
Air conditioning / Klimaanlage:
- Fault: :Internal component failure PTC module
- Code: 8011F9
- Fault: :Under-voltage PTC module
- Code: 8011FA
- Fault: sorry, unknown DTC fault
- Code: 801228
- Fault: sorry, unknown DTC fault
- Code: 801237

I assume the drivetrain fault has something to do with the fault codes from the Motor section.
has anyone had the same issue and any idea on the costs involved to fix the issue as car is no longer under warranty.
BMW F20 116D ED owner

Post Reply

Return to “F20, F21, F22, F23 (2011 - tbd)”