123d Intercooler & Fuel Pump Upgrade!!!

Welcome to ecotune, home of the economy and performance remap. At ecotune we specialise in performance and economy upgrades for cars and commercial vehicles.

Moderators: Rich196, marco_polo, Producethis, Lambster, ecotuneuk

Post Reply
holendru
Junior Member
Junior Member
Posts: 16
Joined: Sun Jan 01, 2017 9:27 pm

Re: 123d Intercooler & Fuel Pump Upgrade!!!

Post by holendru » Fri Sep 01, 2017 5:41 pm

This is how my Alpina d3 is going right now

https://youtu.be/td55_RVrCuQ
Top
jgalea324
Enthusiastic Member
Enthusiastic Member
Posts: 1641
Joined: Thu Feb 05, 2015 7:15 pm
Location: Malta

Re: 123d Intercooler & Fuel Pump Upgrade!!!

Post by jgalea324 » Mon Sep 11, 2017 6:58 am

holendru wrote: ↑
Fri Sep 01, 2017 5:41 pm
 This is how my Alpina d3 is going right now

https://youtu.be/td55_RVrCuQ
That's rather slow to be honest - mine on Stage 2 is quicker than that. You need to turn off the DTC as well for the best launches. Don't forget it's not all about power either.
2010 E87 123d Msport - BMWP Body Kit, Front E9x M3 LCAs, Powerflex rear inserts, E81 chassis brace, Brembo brakes, 280 bhp/480nm torque (BMWP IC/DPF Delete) - viewtopic.php?f=19&t=70528


Image
Top
Wesersstage3bmw
Junior Member
Junior Member
Posts: 2
Joined: Sat Oct 14, 2017 7:34 pm

Re: 123d Intercooler & Fuel Pump Upgrade!!!

Post by Wesersstage3bmw » Sat Oct 14, 2017 7:41 pm

Hi typergaz and others.. hope u can help me with the co4.2 removal!! I have some ideas and standard pic to remove but wondering if I need to take of the old cog and put on new pump!! Is it the same size as 4.2 pump!! As want to make a good job of it and not blow my car up lol many thanks guys
Wes
Top
Wesersstage3bmw
Junior Member
Junior Member
Posts: 2
Joined: Sat Oct 14, 2017 7:34 pm

Re: 123d Intercooler & Fuel Pump Upgrade!!!

Post by Wesersstage3bmw » Sat Oct 14, 2017 7:55 pm

Wesersstage3bmw wrote: ↑
Sat Oct 14, 2017 7:41 pm
 Hi typergaz and others.. hope u can help me with the co4.2 removal!! I have some ideas and standard pic to remove but wondering if I need to take of the old cog and put on new pump!! Is it the same size as 4.2 pump!! As want to make a good job of it and not blow my car up lol many thanks guys
Wes
Adie123d wrote: ↑
Mon Apr 24, 2017 10:54 pm
 It's booked in with Ecotune at the end of may to get remapped stage2+ for the new mods
So I'll post results when it's done.

And when it got it all kind of back together I just let it build up some fuel pressure with the ignition switched on, then cranked it for about 10 seconds and it started.
Was well happy as it was 1am in the morning and I was goosed.
It's running fine though So looks like I did an okay job with no leaks etc
Can't wait for the dyno time now
Top
Post Reply

Return to “Ecotune”