MPE Fitment

All things M135i related can be found in here

Moderators: marco_polo, Producethis, babybmwadmin, Lambster, Rich196

Post Reply
User avatar
RDowson
Experienced Member
Experienced Member
Posts: 339
Joined: Thu Sep 14, 2017 12:29 pm
Contact:

MPE Fitment

Post by RDowson » Fri Apr 13, 2018 1:50 pm

I have just chopped about 1cm off my midpipe to get my MPE tips to not stick out as much. They are perfect now but I’ve noticed that the left tip sits slightly higher than the right one. There’s not much in it but it bugs my ocd.

Would a couple or washers or a spacer in between the left exhaust hanger and the chassis be the best way to adjust the height? When I played with the bracket on the midpipe it seemed to result in the tips sticking further or again.
M140i Shadow Edition - Sunset Orange - M Performance Exhaust - Front Silencer Delete - Bimecc Spacers - Bluespark - Motech Eibach Springs - M Performance Bump Stops - Powerflex Subframe Inserts - Underbelly Brace - Pipercross Filter

Post Reply

Return to “M135i/M235i/M140i/M240i”