Coding for Recaro CS/BMWP seats

Information about coding your BMW

Moderators: marco_polo, Producethis, Lambster, babybmwadmin, Rich196

Post Reply
shandybass
Enthusiastic Member
Enthusiastic Member
Posts: 1777
Joined: Fri Nov 04, 2011 8:24 pm
Location: Horbury, West Yorkshire

Coding for Recaro CS/BMWP seats

Post by shandybass » Sat Oct 21, 2017 7:25 am

is anybody able to carry out the required coding for the airbags etc for me to fit a set of recaro CS seats?
Thanks
Andy
RB TURBO 135i
Tuned with MHD by WEDGE PERFORMANCE
FUEL-IT Stage 2 bucket less pump
E92 M3 rear subframe and LSD
Bilstein shocks & Eibach springs
Milltek exhaust
VRSF downpipes
Spec stage 2+ clutch
Ray West geometry setup

User avatar
Wibbles
Too Much Time To Waste Member
Too Much Time To Waste Member
Posts: 4694
Joined: Thu Feb 17, 2011 7:53 pm
Location: Tyne & Wear

Re: Coding for Recaro CS/BMWP seats

Post by Wibbles » Thu Oct 26, 2017 2:33 pm

yes, do you have a cable with NCS expert?
F21 M135i - AW CR - lots of options.
Coding for all BMW's: Enquiries@BRdiagnostics.co.uk
Please visit my BabyBMW sponsors section: Here

shandybass
Enthusiastic Member
Enthusiastic Member
Posts: 1777
Joined: Fri Nov 04, 2011 8:24 pm
Location: Horbury, West Yorkshire

Re: Coding for Recaro CS/BMWP seats

Post by shandybass » Thu Oct 26, 2017 8:38 pm

i have a cable but i could do with a fresh install of ncs expert, i have all the coding tools software but they are riddled with errors. I'm also on windows 10, not sure if that was my issue with it.
RB TURBO 135i
Tuned with MHD by WEDGE PERFORMANCE
FUEL-IT Stage 2 bucket less pump
E92 M3 rear subframe and LSD
Bilstein shocks & Eibach springs
Milltek exhaust
VRSF downpipes
Spec stage 2+ clutch
Ray West geometry setup

User avatar
Wibbles
Too Much Time To Waste Member
Too Much Time To Waste Member
Posts: 4694
Joined: Thu Feb 17, 2011 7:53 pm
Location: Tyne & Wear

Re: Coding for Recaro CS/BMWP seats

Post by Wibbles » Fri Oct 27, 2017 12:29 pm

Drop me a PM for links.
F21 M135i - AW CR - lots of options.
Coding for all BMW's: Enquiries@BRdiagnostics.co.uk
Please visit my BabyBMW sponsors section: Here

CraigG
Knowledgeable Member
Knowledgeable Member
Posts: 74
Joined: Thu Jul 27, 2017 11:05 am

Re: Coding for Recaro CS/BMWP seats

Post by CraigG » Fri Oct 27, 2017 4:12 pm

shandybass wrote:
Thu Oct 26, 2017 8:38 pm
i have a cable but i could do with a fresh install of ncs expert, i have all the coding tools software but they are riddled with errors. I'm also on windows 10, not sure if that was my issue with it.
i have just installed the Bimmergeeks setup, following this guide:

http://www.e90post.com/forums/showthread.php?t=1405801

Im using a cable-shack cable, and its working perfect :)
tested it yesterday by coding the digital speedo and removing the speedo correction :)
130i Msport - Sapphire Black - KW V2, BMWP Exhaust, BMWP Short Shift Kit, BMWP Grills, LCI Blackline High

Post Reply

Return to “Coding/Software”