Paddle shift retrofit

E and F series coding & Diagnostics, performed on site and remotely.
Cable sales -- Loan cables – Cruise control retrofit options for all 1 & 2 series cars.
Coding options for all BMW cars and competitive prices.

Moderators: babybmwadmin, marco_polo, Producethis, Lambster, Rich196, BRDiagnostics

Post Reply
jordan
Knowledgeable Member
Knowledgeable Member
Posts: 162
Joined: Mon May 16, 2016 6:31 pm

Paddle shift retrofit

Post by jordan » Mon Aug 07, 2017 10:13 pm

Hi,im looking to get paddle shift retrofitted to my 2012 f21 116i, i believe it needs a wire run from (A83*2B pin 3) on the back of the slip ring to (A173*7B pin 5) on the FEM module and also some coding to switch between 205 to 2TB. not sure what else it may need.

just wondering if this can be done and if so, could you could give me a rough idea of the price if i supply the new wheel with paddles.

also where are you based?

cheers,
jordan.

User avatar
Wibbles
Too Much Time To Waste Member
Too Much Time To Waste Member
Posts: 4614
Joined: Thu Feb 17, 2011 7:53 pm
Location: In the Coding Cave...

Re: Paddle shift retrofit

Post by Wibbles » Mon Aug 07, 2017 10:22 pm

jordan wrote:Hi,im looking to get paddle shift retrofitted to my 2012 f21 116i, i believe it needs a wire run from (A83*2B pin 3) on the back of the slip ring to (A173*7B pin 5) on the FEM module and also some coding to switch between 205 to 2TB. not sure what else it may need.

just wondering if this can be done and if so, could you could give me a rough idea of the price if i supply the new wheel with paddles.

also where are you based?

cheers,
jordan.
I'm based in Gateshead.

Do you want it fitting or just coding?
F21 M135i - AW CR - lots of options.
Coding for all BMW's: Enquiries@BRdiagnostics.co.uk
Please visit my BabyBMW sponsors section: Here

jordan
Knowledgeable Member
Knowledgeable Member
Posts: 162
Joined: Mon May 16, 2016 6:31 pm

Re: Paddle shift retrofit

Post by jordan » Mon Aug 07, 2017 10:40 pm

Fitted, I'd screw it up if I tried.

Sent from my SM-G935F using Tapatalk


jordan
Knowledgeable Member
Knowledgeable Member
Posts: 162
Joined: Mon May 16, 2016 6:31 pm

Re: Paddle shift retrofit

Post by jordan » Tue Aug 08, 2017 2:01 pm

Hi, sorry to mess you about, but I'd only need it coded.

checked the FEM module today and the wire is already run from pin 5 to the slip ring for the paddles, I can fit the wheel myself.

Sent from my SM-G935F using Tapatalk


User avatar
Wibbles
Too Much Time To Waste Member
Too Much Time To Waste Member
Posts: 4614
Joined: Thu Feb 17, 2011 7:53 pm
Location: In the Coding Cave...

Re: Paddle shift retrofit

Post by Wibbles » Tue Aug 08, 2017 10:21 pm

jordan wrote:Hi, sorry to mess you about, but I'd only need it coded.

checked the FEM module today and the wire is already run from pin 5 to the slip ring for the paddles, I can fit the wheel myself.

Sent from my SM-G935F using Tapatalk
No problem, send me a mail for a price.

Sent from my SM-G950F using Tapatalk

F21 M135i - AW CR - lots of options.
Coding for all BMW's: Enquiries@BRdiagnostics.co.uk
Please visit my BabyBMW sponsors section: Here

Post Reply

Return to “BR Diagnostics & Retrofits”