Welcome to our new sponsor

Based in Cramlington, Northumberland, we specialize in exhaust systems & carry out the ever popular mods to standard M lite exhaust systems. We also perform front box mods, PPF mods, Resonator deletes and the amazing back box modification. Giving your M lite the noise it should have had from the factory.
We have access to a vast range of off the shelf performance exhaust systems, as well as custom exhaust work that we carry out in our fully equipped fabrication workshop.

Moderators: Lambster, Rich196, Producethis, marco_polo, babybmwadmin, Boz-chis-tech

Post Reply
User avatar
babybmwadmin
Site Administrator
Site Administrator
Posts: 1080
Joined: Wed Dec 31, 2003 12:57 am
Location: Belfast, Northern Ireland
Contact:

Welcome to our new sponsor

Post by babybmwadmin »

Welcome to Chis-Tech our new sponsor.

John (Boz-chis-tech) will be along shortly to explain more about what his company does.

"Chis-Tech are based in Cramlington, Northumberland. We specialize in exhaust systems. We carry out the ever popular exhaust modifications to standard M lite exhaust systems.
Front box mods, PPF mods, Resonator deletes and the amazing back box modification. Giving your M lite the noise it should have had from the factory.
We have access to a vast range of off the shelf performance exhaust systems, as well as custom exhaust work that we carry out in our fully equipped fabrication workshop.
We can supply and fit systems, modify your system or custom make a system for you, 3.5" is popular with the hybrid turbo B58 guys.
We are based in the same unit as Williams Performance, so you can take advantage of everything both companies have to offer.
We try to carry a stock of exhaust systems to offer on an exchange basis, stock levels vary
."
User avatar
Tuska20000
Experienced Member
Experienced Member
Posts: 217
Joined: Sat Feb 27, 2021 6:08 pm

Re: Welcome to our new sponsor

Post by Tuska20000 »

Welcome to babybmw John

Sent from my G8141 using Tapatalk

Boz-chis-tech
Junior Member
Junior Member
Posts: 9
Joined: Mon Apr 05, 2021 9:51 am

Re: Welcome to our new sponsor

Post by Boz-chis-tech »

Hi Everyone,

Big Thank you for letting me use this forum to offer our services.

We are an exhaust specialist based in Cramlington Northumberland.

We have been modifying the standard M-lite exhausts for a while now with good results, much the same asthe PCW and ModStock guys.
m135i, m235i, m140i and m240i, giving your M-lite the sound it should of had from the factory.

For the m135i and m235i, we can remove the resonator and modify the rear back box.

For the m140i and m240i pre- PPF, we can modify the first silencer and remove the resonator as well as the back box modification.

For the PPF model m140i and m240i, we can modify the PPF, remove the resonator as well as the back box modification.

The modifications are hard to spot when looking up front under the car, apart from the resonator which is removed and replaced with a 304 stainless steel section of pipe.

We only use the best materials that we can get hold of, everything is done to last and all hardware is stainless steel, the welds are stainless to.

We have a small stock of systems to offer on an exchange basis.

We have a few customers who are pushing 600bhp on a hybrid turbo running our modified systems with no issues.

The sound and tone are very similar to the MPE, but with the first box mod and resonator they can sound much better. Its not an obnoxious sound, Autos dont seam to suffer to much from drone with the resonator removed, however we have had reports that the Manuals suffer a tad from drone with the resonator removed. However, this is all down to personal preference.

This isn't limited to the M-lites, we have done e92 v8 m3s, the full range of b58 models and the S55 M2, m3 and m4 models.

We carry out the work in our fully equipped 3300sqft workshop on a drive in appointment.

The modifications can be carried out on a vast range of BMWs, not just the M-lites.

Alongside this, we offer custom built exhaust systems, these are made on your car, 304 stainless steel, tig welded, again using the best range of materials we can get hold of.
Part of this is a back box delete if you are looking for a more savage sound.

We have a lot of hybrid turbo cars running custom 3.5" systems, these have been proven to respond well and pick up a generous BHP increase.

We have access to a huge product line of aftermarket performance exhaust systems, from all of the major companies and more.

Some of our suppliers have offered us to run group buys, so good savings can be made.

Our website is www.chistech.co.uk
@chis_tech Instagram

chistechinfo@gmail.com

If there is anything you can not find to suit your requirements on the website, drop us an email and we can look into it for you.

John aka BOZ or Chris if you follow certain BMW youtubers :lol:
Boz-chis-tech
Junior Member
Junior Member
Posts: 9
Joined: Mon Apr 05, 2021 9:51 am

Re: Welcome to our new sponsor

Post by Boz-chis-tech »

The important part

Pricing for modifying the standard system.

First box mod and Back box mod £300
First box mod and resonator delete £240
Resonator delete £120
PPF mod and back box mod £300
PPF mod and resonator delete £240
Resonator delete and back box mod £320
First box mod / PPF mod,Resonator delete and back box mod £340
Back box mod £240

Exchange items are available depending on stock levels.
These are £160 with your exhaust as an exchange, we change over your tips and valve actuator as the systems we keep in stock are bare.

We operate on 2-3 week wait from booking your appointment, a deposit is required to secure your appointment.
Unfortunately due to a few time wasters in the past, this is non refundable, however we can rearrange appointment dates if something pops up.

If a few people were to book in together, we could arrange a discount.

***PPF model cars will throw up an EML on the dash, this is due to the back pressure sensor on the cars, however this has no effect to the performance of the car, no limp mode. We can have the PPF light coded out, this incurs a charge of £150, or if you are running BM3, MHD, MG Flasher etc, it can be removed via the software.***

We have videos on our Instagram, however they never do them justice @chis_tech

Boz
Boz-chis-tech
Junior Member
Junior Member
Posts: 9
Joined: Mon Apr 05, 2021 9:51 am

Re: Welcome to our new sponsor

Post by Boz-chis-tech »

I should also add, We are based in the same workshop as the well known Williams Performance, so you are always in good hands and can take advantage of everything we both have to offer
Jambo87
Junior Member
Junior Member
Posts: 29
Joined: Wed Mar 10, 2021 6:28 pm

Re: Welcome to our new sponsor

Post by Jambo87 »

I can vouch for chistech. Cracking work and a cracking lad. See you soon john for more work.

Cheers jamie
Current- melbourne red m140i

Gone- Mercedes gla
Megane rs cup
Golf gti
Clio 182
And numerous work vehicles
Boz-chis-tech
Junior Member
Junior Member
Posts: 9
Joined: Mon Apr 05, 2021 9:51 am

Re: Welcome to our new sponsor

Post by Boz-chis-tech »

Cheers Jamie 👍

More noise on the way 😂
Jambo87
Junior Member
Junior Member
Posts: 29
Joined: Wed Mar 10, 2021 6:28 pm

Re: Welcome to our new sponsor

Post by Jambo87 »

Certainly is. See you tomorrow 🤣
Current- melbourne red m140i

Gone- Mercedes gla
Megane rs cup
Golf gti
Clio 182
And numerous work vehicles
Jambo87
Junior Member
Junior Member
Posts: 29
Joined: Wed Mar 10, 2021 6:28 pm

Re: Welcome to our new sponsor

Post by Jambo87 »

Round 2 at chistech complete and absolutely buzzing with results. Car sounds spot on. Again fantastic work from john. And although this is a bm forum the custom rs3 system he made was an absolute work of art🤩🤩🤩
Current- melbourne red m140i

Gone- Mercedes gla
Megane rs cup
Golf gti
Clio 182
And numerous work vehicles
Boz-chis-tech
Junior Member
Junior Member
Posts: 9
Joined: Mon Apr 05, 2021 9:51 am

Re: Welcome to our new sponsor

Post by Boz-chis-tech »

Thanks again.

It's amazing how you can have the standard system make as much noise, if not more than an aftermarket system👍

That RS3 system has been a Labour of love over the last few days.

With all of those pie cuts, there is probably more welds on it than that of 20 full exhaust systems 🙈😂

A good challenge a d the customer was happy, but everyday is a school day, so I'm always trying to do better.

Back for the back box mod next? 😂
Jambo87
Junior Member
Junior Member
Posts: 29
Joined: Wed Mar 10, 2021 6:28 pm

Re: Welcome to our new sponsor

Post by Jambo87 »

Boz-chis-tech wrote: Fri Apr 09, 2021 9:54 pm Thanks again.

It's amazing how you can have the standard system make as much noise, if not more than an aftermarket system👍

That RS3 system has been a Labour of love over the last few days.

With all of those pie cuts, there is probably more welds on it than that of 20 full exhaust systems 🙈😂

A good challenge a d the customer was happy, but everyday is a school day, so I'm always trying to do better.

Back for the back box mod next? 😂
🤣🤣🤣 yep along with some other goodies. See you soon matey
Current- melbourne red m140i

Gone- Mercedes gla
Megane rs cup
Golf gti
Clio 182
And numerous work vehicles
User avatar
Major_Sarcasm
Enthusiastic Member
Enthusiastic Member
Posts: 586
Joined: Sat May 02, 2015 9:54 am
Location: UK

Re: Welcome to our new sponsor

Post by Major_Sarcasm »

If you fancied branching out a little (subtle pun not intended), a number of 135i owners (N54 & N55) have looked over the years for a supplier of the infamous E82 y-pipe as BMW no longer make them. If you could knock a few of them up to sleeve-fit the standard 135i system as the original did, I'm sure there'd be takers.

Image

Image

Supersprint offer one, but state that it's supposed to be mated to their centre section, thus more than doubling the cost.
2011 E82 135i LCI M Sport, N55, Manual <--- Clicky for build thread :)
"In Soviet Russia, rear wiper deletes you"
Post Reply

Return to “Chis-Tech”