E8x Camber plate project

All other aftermarket mods

Moderators: Lambster, Rich196, Producethis, marco_polo, babybmwadmin

wrevilo23
Experienced Member
Experienced Member
Posts: 369
Joined: Tue Jul 23, 2019 9:54 pm
Location: Hampshire

Re: E8x Camber plate project

Post by wrevilo23 »

Thanks to Ian's advice I was finally able to get my stage 1 camber plates orientated correctly yesterday. With those, M3 arms and everything in an inboard position I have achieved a reported 1.6 degrees of negative camber.

I'll likely get a more accurate set of results from an alignment check later in the year.
2008 E81 130i M Sport: Bilstein B12 Pro Kit, E92 M3 front arms, THETYRANT's camber plates, F2x Brembo front brakes,
E92 M3 rear arms, Whiteline sub frame inserts, 18x8 ET40 Alutec Drive wheels, modified 135i N55 backbox
Dan258
Knowledgeable Member
Knowledgeable Member
Posts: 113
Joined: Thu Dec 22, 2016 2:01 pm
Location: Kent

Re: E8x Camber plate project

Post by Dan258 »

Quick thanks to Ian for the plates. I've had them for months now but they went on a couple of weeks back with an alignment and various other bits. Got 2 degrees on the front and along with the rear subframe inserts, it feels completely different and handles really well. Highly recommend them! Also, great packaging and great instructions. Dead easy to install.
BMW 130i e87 Black Sapphire 2008 M Sport - BMWP Exhaust, BMWP Air Filter, M135i Front Brakes, Bilstein B12 and more...
User avatar
THETYRANT
Too Much Time To Waste Member
Too Much Time To Waste Member
Posts: 3497
Joined: Fri Jun 04, 2010 2:02 pm
Location: Cumbria UK

Re: E8x Camber plate project

Post by THETYRANT »

Good to hear all is well Dan :D
--
Now on my 3rd 130i, this time a nice E81 in Graphite, Previously 2 x 130i and 2 x 135i

Camber plate project - http://www.babybmw.net/forum/viewtopic.php?f=20&t=96465

Suspension Quest thread - http://www.babybmw.net/forum/viewtopic.php?f=20&t=80208
User avatar
SmurfN
Junior Member
Junior Member
Posts: 46
Joined: Fri Sep 29, 2017 4:48 pm

Re: E8x Camber plate project

Post by SmurfN »

Finally got around to installing my stage 2 plates and subframe inserts, easy peasy. and new wheels and tyres. 18x9 et35, 225/40/18 Michelin pilot sport 4. stock msport suspension

Image
Image
Image
Post Reply

Return to “Aftermarket modifications”