Splitters!

All other aftermarket mods

Moderators: Rich196, babybmwadmin, marco_polo, Producethis, Lambster

Gatsods
Junior Member
Junior Member
Posts: 38
Joined: Mon Nov 27, 2017 10:46 pm

Re: Splitters!

Post by Gatsods » Thu Nov 30, 2017 11:37 pm

D6EML wrote:
DanT wrote:
Sun Aug 06, 2017 9:24 pm
How did you do the camber? M4 lca/ts?


Sent from my iPhone using Tapatalk
On a hunter wheel alignment rig .

Dean
New member on here having a look around... I completely agree with the post above, Dean your car looks absolutely fantastic Image

I think the M4 style mirrors look awesome too, finishes it off really nicely.

-Gatsods

Sent from my SM-G935F using Tapatalk


Timbartlett
Junior Member
Junior Member
Posts: 40
Joined: Sat Dec 30, 2017 2:02 pm

Re: Splitters!

Post by Timbartlett » Mon Jan 01, 2018 5:46 pm

Also a new member here, and again +1 on the above. Absolute beaut Dean!

D6EML
Enthusiastic Member
Enthusiastic Member
Posts: 599
Joined: Wed Oct 12, 2016 4:00 pm

Re: Splitters!

Post by D6EML » Mon Jan 01, 2018 8:45 pm

Thanks guys , I’d say the autoid mirror caps could be my favourite modification to the car .

Dean
AW M2 lci

GBC80
Knowledgeable Member
Knowledgeable Member
Posts: 113
Joined: Mon Feb 05, 2018 7:50 pm

Re: Splitters!

Post by GBC80 » Thu Mar 01, 2018 8:07 pm

D6EML wrote:
Thu Aug 03, 2017 9:09 pm
Wolfgang wrote:
Thu Aug 03, 2017 8:11 pm
D6EML wrote:Image

Maxton front splitter in gloss black.
Cost around £130.00

Dean
What was the quality like on the Maxton?


Sent from my iPhone using Tapatalk
It's a perfect fit , not cutting required .
It's a plastic mould so although it looks like it's about 10mm in depth it recesses back up underneath, the material is maybe 2mm thick .
Really enhances the front end

Dean
Is it pretty easy and straight forward to install it? any drilling or anything like that required? Is it something you can do on your drive just by jacking up the car? Also, can you remove the Maxton logo on the centre? thanks
M135i Lci...with a few goodies and mods

D6EML
Enthusiastic Member
Enthusiastic Member
Posts: 599
Joined: Wed Oct 12, 2016 4:00 pm

Re: Splitters!

Post by D6EML » Thu Mar 01, 2018 8:12 pm

It’s a 2 person job really , you’ll need to drill through the splitter into the underside of the bumper , I used self tapers and a little bead of bond to hold it all secure . You can do it on the drive if you can get the car jacked up . The maxton badge is recessed into the splitter so removing it will leave an indent .

Dean
AW M2 lci

Iain 007
Knowledgeable Member
Knowledgeable Member
Posts: 122
Joined: Sun Mar 29, 2015 8:10 pm

Re: Splitters!

Post by Iain 007 » Tue Mar 20, 2018 3:43 pm

I had the Kerscher carbon one on mine.

Image


Sent from my iPhone using Tapatalk

User avatar
AndyBish135i
Enthusiastic Member
Enthusiastic Member
Posts: 1544
Joined: Wed Nov 25, 2015 9:56 pm
Location: Wurzel country

Re: Splitters!

Post by AndyBish135i » Tue Mar 20, 2018 3:47 pm

Haha, love the number plate! :lol:

Post Reply

Return to “Aftermarket modifications”