Tyre and TPMS questions

Fed up with your run flats? Fancy a change of rubber?
Looking a new set of wheels? Get all your tyre/alloys info in here

Moderators: Rich196, babybmwadmin, marco_polo, Producethis, Lambster

Post Reply
Dave-H
Knowledgeable Member
Knowledgeable Member
Posts: 98
Joined: Fri Nov 15, 2013 11:54 pm

Tyre and TPMS questions

Post by Dave-H » Wed Mar 14, 2018 8:29 pm

Hi all,

My car currently has Potenza runflats on and a buckled front rim so I’m looking to replace the wheel and fit a set of MPSS. To that end, I have a couple of questions:

1) What load rating should I be going for? It currently has 88Y all round but I think it needs 92Y XL on the rear doesn’t it? Is this right and what does it need on the front?

2) Can the TPMS be swapped from the old rim onto the new one? If so, how difficult is this to do?

Many thanks in advance :)

Dave
2016 M140i, Manual
2015 Yamaha R1

Post Reply

Return to “Tyres/Wheels”