Mounting coilovers

All things M135i related can be found in here

Moderators: Rich196, babybmwadmin, marco_polo, Producethis, Lambster

Post Reply
User avatar
Fidiman
Knowledgeable Member
Knowledgeable Member
Posts: 200
Joined: Mon Feb 06, 2017 6:38 am
Location: France
Contact:

Mounting coilovers

Post by Fidiman » Sat Jun 30, 2018 8:55 pm

Hi guys!

Just bought my set of coilovers today (ST XA = KW V2). I still need to buy some stuff as new top mounts, new bolts and screws.

I read on the board that someone brake the antiroll bar rod. Should I replace it as I will mount a lowered suspension? Have the guy with springs this problem? I saw Turner Motorsport or HP Autowerks provide reinforced pieces.

Should I put some spacers front and/or rear? I heard that the clearance on the front axle could be very tight (and Other the OEM setup, there is quite no place).

Thanks in advance guys ;)
Image

The blog - News for 1 and 2 Series

Post Reply

Return to “M135i/M235i/M140i/M240i”