Enhanced Bluetooth - No Ringing

Information about coding your BMW

Moderators: Rich196, babybmwadmin, marco_polo, Producethis, Lambster

Post Reply
danb21t
Junior Member
Junior Member
Posts: 3
Joined: Tue Jun 19, 2018 3:00 pm

Enhanced Bluetooth - No Ringing

Post by danb21t » Sat Sep 15, 2018 7:57 pm

Hi all,

I'm new to coding using e-sys, but have done significant reading and watched many vids.

I've got an f22 and I wanted to add enhanced bluetooth, which I have done successfully, both phone pair up and all seems well. However during testing I've found that my main phone (Android) when calling doesn't ring through the car speakers. This isn't the case for my secondary phone (iPhone).

I can initiate a call from my Android using iDrive, that works, but the only speaker feedback is from the actual handset itself. I've tried the same from my iPhone both as primary phone (1) and additional phone (2) this speaker feedback from both car and handset.

I've tried removing the devices and reconnecting to no avail.

Very strange and I'm a bit lost of what to check next.

These are the only settings I've changed since I started.
HMI 3000 > OFFICE_MENUS_ACTIVE = aktiv
AUDIO_TUNER_TRAFFIC 3002 > MICRPHONE_NUMBER = wert_2
TELEFON_TELEMATIK_ONLINE 3003 > SINGLE_OR_MULTILINK = multilink
TELEFON_TELEMATIK_ONLINE 3003 > PIM_SPEECH_TO_TEXT = aktiv
TELEFON_TELEMATIK_ONLINE 3003 > PIM_NEW_ELEMENT_VOICE_MAIL = aktiv
TELEFON_TELEMATIK_ONLINE 3003 > PIM_NEW_ELEMENT_EMAIL = aktiv
TELEFON_TELEMATIK_ONLINE 3003 > PIM_NEW_ELEMENT_SMS = aktiv
TELEFON_TELEMATIK_ONLINE 3003 > PIM_NEW_ELEMENT_AUDIO_NOTE = aktiv
TELEFON_TELEMATIK_ONLINE 3003 > PIM_BILDER_EIN_AUS = aktiv
TELEFON_TELEMATIK_ONLINE 3003 > REMINDER_EIN_AUS = aktiv
TELEFON_TELEMATIK_ONLINE 3003 > AUDIO_NOTES_EIN_AUS = aktiv
TELEFON_TELEMATIK_ONLINE 3003 > SIM_EIN_AUS = aktiv
TELEFON_TELEMATIK_ONLINE 3003 > API_USB_VIDEO = both
TELEFON_TELEMATIK_ONLINE 3003 > BLUETOOTH_2ND_HPF = akitv
TELEFON_TELEMATIK_ONLINE 3003 > CALENDAR_EIN_AUS = aktiv
TELEFON_TELEMATIK_ONLINE 3003 > CONTACT_BOOK_PICTURES = aktiv
TELEFON_TELEMATIK_ONLINE 3003 > DATACOMM_CSIM = aktiv
TELEFON_TELEMATIK_ONLINE 3003 > EMAIL_EIN_AUS = aktiv
TELEFON_TELEMATIK_ONLINE 3003 > MACRO_PIM = aktiv
TELEFON_TELEMATIK_ONLINE 3003 > TASK_EIN_AUS = aktiv
TELEFON_TELEMATIK_ONLINE 3003 > TEXT_NOTES_EIN_AUS = aktiv
TELEFON_TELEMATIK_ONLINE 3003 > TWO_PHONES_PARALLEL = aktiv
TELEFON_TELEMATIK_ONLINE 3003 > INBAND_RINGING = aktiv

I did take a baseline backup before starting, so I guess I can revert but would rather get it resolved.

Any thoughts guys?!

Cheers,
Dan

User avatar
Wibbles
Too Much Time To Waste Member
Too Much Time To Waste Member
Posts: 5070
Joined: Thu Feb 17, 2011 7:53 pm
Location: Tyne & Wear

Re: Enhanced Bluetooth - No Ringing

Post by Wibbles » Sun Sep 16, 2018 7:19 am

Did you change all those individually?

You don't need to code EBT in that manner.
BR Diagnostics & Retrofits
Apple Carplay - ONLY £89 - BabyBMW Special offer!
Coding for all BMW's: Enquiries@BRdiagnostics.co.uk
Please visit my BabyBMW sponsors section: Here
BRD on Facebook

danb21t
Junior Member
Junior Member
Posts: 3
Joined: Tue Jun 19, 2018 3:00 pm

Re: Enhanced Bluetooth - No Ringing

Post by danb21t » Sun Sep 16, 2018 10:20 am

Hi Wibbles

They were changed over three sessions.

Initially I missed SIM_EIN_AUS, and then I added INBAND_RINGING to try and get the audio working for Android.

What are the basics required? Just these two?
TELEFON_TELEMATIK_ONLINE 3003 > TWO_PHONES_PARALLEL = aktiv
TELEFON_TELEMATIK_ONLINE 3003 > BLUETOOTH_2ND_HPF = akitv

Could it be MICRPHONE_NUMBER that is causing the issue?

Cheers
Dan

Ja50nK
Experienced Member
Experienced Member
Posts: 207
Joined: Wed Aug 30, 2017 6:45 pm
Location: Dorset / Ringwood

Re: Enhanced Bluetooth - No Ringing

Post by Ja50nK » Sun Sep 16, 2018 11:57 am

Not sure it will help, but rather than changing a while load of random variables, I coded using the VO code. So I changed 6NS to 6NW (or something - depends what your VO is and nbt version). The only individual coding I then did was go back and change microphones to 1, as I only have 1 and didn't want an error throwing up all the time. Maybe that would be a good way to go? Revert everything, and code using e-sys using the VO (don't change the actual VO, just code using it) - it changes everything it needs to itself then with no bother...

Doing that, I've had no issues - all phones ring (albeit both android). The only issue I have had is the Calendar not coming through on Connected drive, but with multiple reports of the same on Android elsewhere I suspect it is just the crappy Connected drive app on Android.

Worth a shot, and far less 'risky'? Plenty of info on the coding forum.

Sent from my SM-G965F using Tapatalk

Sunset Orange LCI2 M140i, Auto, 5 Door, MPE

danb21t
Junior Member
Junior Member
Posts: 3
Joined: Tue Jun 19, 2018 3:00 pm

Re: Enhanced Bluetooth - No Ringing

Post by danb21t » Sun Sep 16, 2018 6:43 pm

Hi guys,

Thanks for your help.

I have resolved the issue.

It would seem it was my phone that was the issue, I tested with an alternative Android phone and it was working fine. I rebooted my phone, re-paired it with the car and all is well.

Before that I put the car back to before I started tinkering and then went through the 6NH to 6NS method of coding the enhanced bluetooth.

Stupid phone!

Cheers,
Dan

Post Reply

Return to “Coding/Software”