Cruise control retrofit

This section shows how to carry out modifications to your 1 Series. Please remember that if you are modifying your car to take photo's at each step and document the mod in here.
Please read the announcement at the top of the section before posting.

Moderators: Rich196, babybmwadmin, marco_polo, Producethis, Lambster

User avatar
Wibbles
Too Much Time To Waste Member
Too Much Time To Waste Member
Posts: 4998
Joined: Thu Feb 17, 2011 7:53 pm
Location: Tyne & Wear

Re: Cruise control retrofit

Post by Wibbles » Tue May 30, 2017 6:53 am

you only need to code DSC & Kombi.

use Tool 32 to reset the steering angle sensor, DIS is difficult to set up & get working. Search this thread for instructions on how to use Tool32.
Apple Carplay - £99 - BabyBMW Special offer!
Coding for all BMW's: Enquiries@BRdiagnostics.co.uk
Please visit my BabyBMW sponsors section: Here
BRD on Facebook

SupernoodlesRS
Junior Member
Junior Member
Posts: 26
Joined: Mon Feb 20, 2017 8:25 am

Re: Cruise control retrofit

Post by SupernoodlesRS » Tue May 30, 2017 1:26 pm

Wibbles wrote:
Tue May 30, 2017 6:53 am
you only need to code DSC & Kombi.

use Tool 32 to reset the steering angle sensor, DIS is difficult to set up & get working. Search this thread for instructions on how to use Tool32.
Oh perfect I have that installed already, will give it a go - thanks :)

User avatar
Wibbles
Too Much Time To Waste Member
Too Much Time To Waste Member
Posts: 4998
Joined: Thu Feb 17, 2011 7:53 pm
Location: Tyne & Wear

Re: Cruise control retrofit

Post by Wibbles » Tue May 30, 2017 1:43 pm

SupernoodlesRS wrote:
Wibbles wrote:
Tue May 30, 2017 6:53 am
you only need to code DSC & Kombi.

use Tool 32 to reset the steering angle sensor, DIS is difficult to set up & get working. Search this thread for instructions on how to use Tool32.
Oh perfect I have that installed already, will give it a go - thanks :)
Make sure the front wheels are straight as well as the steering wheel before running the steering angle job.

Sent from my SM-G920F using Tapatalk

Apple Carplay - £99 - BabyBMW Special offer!
Coding for all BMW's: Enquiries@BRdiagnostics.co.uk
Please visit my BabyBMW sponsors section: Here
BRD on Facebook

bung206
Junior Member
Junior Member
Posts: 20
Joined: Thu May 05, 2016 8:52 am

Re: Cruise control retrofit

Post by bung206 » Tue Jul 11, 2017 12:44 am

I've got an E82 135i (N55). I've been wanting to fit CC for a while - I decided to check RealOEM to see if hte part fits. There are many part numbers - which one is the best fit for my car? They're all available on Ebay. My car has rain sensing wipers so I need the cruise control part with the button on the end you can press with an "A" & a green light on the wiper end,

http://www.realoem.com/bmw/enUS/partxre ... &q=9110887

What does "Exchangable retrospectively" mean in this context? Also, there's 9 part numbers total - which one do I want? Shall I just pick the newest one? But the newest one (61319169072 (12/31/2007 ---) says it is "nonexchangeable retrospectively". What does this mean? Would be appreciated if someone can tell me the part # to buy!

User avatar
supercati
Experienced Member
Experienced Member
Posts: 213
Joined: Fri Mar 24, 2017 10:17 am
Location: Barcelona

Re: Cruise control retrofit

Post by supercati » Thu Jul 27, 2017 9:10 pm

Hello!

I attempted to this today... physical part, easy and simple.

Then I coded everything: $540 to CAS and NFRM, and then the other part to KOMBI and DSC. Later with Tool32 calibration. No errors on dash... buuuut, it's not working. Stalks doesn't work now! Just BC anf MFSW works, every other thing doesn't work: blinkers, wipers, tempomat.

I checked connections twice, they are all ok. I exchanged the steering angle sensor with my old one... same thing, doesn't work.

I thing I might be doing something wrong with coding: when I do $540 tp CAS and NFRM with the FA_WRITE its clear what to do, but what exactly should I code and how after this? How and what exactly should I code to KOMBI and DSC?

Thanks in advance!

EDIT:
I went to my original setup: no Tempomat, and it works well... so either I'm not doing good coding, or the tempomat I used is not valid?

Tempomat I used: 9123051
130i E81 2007 LHD - Sparkling Graphite Metallic / Boston Terra - CDV Delete - 135i ESD with resonator delete - LED Blacklines - RIP :(
130i E81 2008 LHD - LSE / Boston Terra - Complete HiFi Retrofit - CDV Delete - LED Blacklines - BMWP SSK -

User avatar
supercati
Experienced Member
Experienced Member
Posts: 213
Joined: Fri Mar 24, 2017 10:17 am
Location: Barcelona

Re: Cruise control retrofit

Post by supercati » Sat Jul 29, 2017 10:25 am

Update on my previous message:

Installed tempomat stalks.
Added FA/VO $540
FA_WRITE to CAS and NFRM
SG_CODIEREN to CAS, NFRM, KOMBI, DSC
Tool32 to clear errors.

They just don't work. No blinkers, no wipers, no tempomat. BC and MFSW controls worked fine however.

Went back to my stock setup and deleting $540 and everything works fine as before (but no Tempomat :cry: ).


An user from here (thanks!) told me that probably the stalks I bought are probably defective, and there's nothing to do with them... so I will buy another ones and try again in some weeks, and post update on here :)
130i E81 2007 LHD - Sparkling Graphite Metallic / Boston Terra - CDV Delete - 135i ESD with resonator delete - LED Blacklines - RIP :(
130i E81 2008 LHD - LSE / Boston Terra - Complete HiFi Retrofit - CDV Delete - LED Blacklines - BMWP SSK -

User avatar
supercati
Experienced Member
Experienced Member
Posts: 213
Joined: Fri Mar 24, 2017 10:17 am
Location: Barcelona

Re: Cruise control retrofit

Post by supercati » Tue Sep 19, 2017 7:31 am

Another update:

Bought stalks with part number: 9123043

Installed tempomat stalks.
Added FA/VO $540
FA_WRITE to CAS and NFRM
SG_CODIEREN to CAS, NFRM, KOMBI, DSC
Tool32 to clear errors.

---> Tempomat working perfect! :D :D
This post is very useful when doing this retrofit! - Thanks @clarker63


Now, just a final question: my new tempomat stalks work perfect, but the blinker stalk it's way much "harder" than my previous stock one. I need to do more effort/force to activate the blinkers without comfort touch.
It is possible to swap just this stalk from my NON-Tempomat stalks to my new Tempomat stalks?
Image
130i E81 2007 LHD - Sparkling Graphite Metallic / Boston Terra - CDV Delete - 135i ESD with resonator delete - LED Blacklines - RIP :(
130i E81 2008 LHD - LSE / Boston Terra - Complete HiFi Retrofit - CDV Delete - LED Blacklines - BMWP SSK -

teeb
Junior Member
Junior Member
Posts: 4
Joined: Wed Sep 27, 2017 10:59 pm
Location: Paris, FRANCE

Re: Cruise control retrofit

Post by teeb » Sat Oct 21, 2017 8:36 pm

jammy78 wrote:
Sun Jul 31, 2016 3:28 pm
Just to show pics of the fault:

Image

Image

What I think has happened - the slip ring had done a few rotations & the ribbon was at the max prior to install (ie you can only turn the steering wheel so much before you lock).

So when I installed the part & turned the wheel, the ribbon broke (I actually hear it snap but at the time, didn't know what it was).

Anyway - To all..... prior to install, I'd take the cover off & just ensure it hasn't been rotated too many time, otherwise this will happen to you!
Hello everybody,

The exact same thing just happened to me.
I've fitted the new MFSW + slip ring w/ CC stalk (2006 e87) yesterday and today as I was manoeuvering to park I heard a strange noise but I didn't realise at the time. Later when I picked up my car I noticed that the steering wheel wasn't lit and the button weren't responding.
I haven't taken off my steering wheel yet but I'm pretty sure it's gonna look exactly like jammy78's. I'm very disappointed. :cry:
Wibbles said something about repairing the ribbon cable, how exactly? Cheers
E87 118d 2006 - added MFSW + CC & LCI tail lights

ar4ijs15
Junior Member
Junior Member
Posts: 2
Joined: Thu Nov 30, 2017 4:44 pm

Re: Cruise control retrofit

Post by ar4ijs15 » Thu Nov 30, 2017 4:56 pm

hello there i have 318d e91 2011y
i bouth cruise control steering column 9123041 from 320d e90 2010 and when i plug it the turn signal not working and wipers not working only bc button working
the cruise control is programed
where is problem that i have e91 but i bouth from e90 i replaced the wiper swich from my steering column
or just the steering column not working?
thanks.

User avatar
Wibbles
Too Much Time To Waste Member
Too Much Time To Waste Member
Posts: 4998
Joined: Thu Feb 17, 2011 7:53 pm
Location: Tyne & Wear

Re: Cruise control retrofit

Post by Wibbles » Thu Nov 30, 2017 5:49 pm

ar4ijs15 wrote:
Thu Nov 30, 2017 4:56 pm
hello there i have 318d e91 2011y
i bouth cruise control steering column 9123041 from 320d e90 2010 and when i plug it the turn signal not working and wipers not working only bc button working
the cruise control is programed
where is problem that i have e91 but i bouth from e90 i replaced the wiper swich from my steering column
or just the steering column not working?
thanks.
You have the wrong part installed.
Apple Carplay - £99 - BabyBMW Special offer!
Coding for all BMW's: Enquiries@BRdiagnostics.co.uk
Please visit my BabyBMW sponsors section: Here
BRD on Facebook

ar4ijs15
Junior Member
Junior Member
Posts: 2
Joined: Thu Nov 30, 2017 4:44 pm

Re: Cruise control retrofit

Post by ar4ijs15 » Thu Nov 30, 2017 6:01 pm

Wibbles wrote:
Thu Nov 30, 2017 5:49 pm
ar4ijs15 wrote:
Thu Nov 30, 2017 4:56 pm
hello there i have 318d e91 2011y
i bouth cruise control steering column 9123041 from 320d e90 2010 and when i plug it the turn signal not working and wipers not working only bc button working
the cruise control is programed
where is problem that i have e91 but i bouth from e90 i replaced the wiper swich from my steering column
or just the steering column not working?
thanks.
You have the wrong part installed.
i need form e91? 4 cylinder?

Jinx13
Junior Member
Junior Member
Posts: 1
Joined: Sun Dec 24, 2017 3:48 pm

Re: Cruise control retrofit

Post by Jinx13 » Sun Dec 24, 2017 3:51 pm

Wibbles wrote:
Thu Mar 27, 2014 12:17 pm
kamazzi wrote:Has anybody tried to do this retrofit on a F20?
No new stalk required, just a few buttons on the wheel.... but will the wheel replacement and coding alone do the trick?
Yes, I retrofitted cruise to my F20 - absolute piece of cake! I now have the LIM & Cruise functions.Image
Sorry an old post is it right that this part is in excess of £200?

Thank you

User avatar
teasdas
Knowledgeable Member
Knowledgeable Member
Posts: 133
Joined: Mon Dec 17, 2012 10:08 am

Re: Cruise control retrofit

Post by teasdas » Wed Jul 18, 2018 11:21 pm

Hi sorry to resurrect an old thread but I need help with the coding.
I managed to swap everything over and the coding was going well until it came to process ECU and instead of SG_CODIEREN for the job name I have CODIERDATEN_LESEN.

Can anyone point me in the right direction of how to change the job at this point? $540 has remained in the VO.

Cheers, Sam

User avatar
Twenny
Too Much Time To Waste Member
Too Much Time To Waste Member
Posts: 10280
Joined: Tue Feb 18, 2014 5:20 pm
Location: South East Kent

Re: Cruise control retrofit

Post by Twenny » Wed Jul 18, 2018 11:27 pm

teasdas wrote:Hi sorry to resurrect an old thread but I need help with the coding.
I managed to swap everything over and the coding was going well until it came to process ECU and instead of SG_CODIEREN for the job name I have CODIERDATEN_LESEN.

Can anyone point me in the right direction of how to change the job at this point? $540 has remained in the VO.

Cheers, Sam
Contact BR diagnostics a forum sponsor and speak to Craig (wibbles on the forum) and he may offer some help for a small fee. He’ll have it sorted in no time mate.

Good luck
2010 125i E82 Coupe M Sport Black
P-Torqued 266bhp-BMWP exhaust+intake+skirts+gear knob+grilles---Rieger diffuser-Darklines-retrofit cruise control-130i front discs-VMR v710-Eibach ARB
My build thread - http://www.babybmw.net/viewtopic.php?t=60951

User avatar
teasdas
Knowledgeable Member
Knowledgeable Member
Posts: 133
Joined: Mon Dec 17, 2012 10:08 am

Re: Cruise control retrofit

Post by teasdas » Wed Jul 18, 2018 11:49 pm

Twenny wrote:
teasdas wrote:Hi sorry to resurrect an old thread but I need help with the coding.
I managed to swap everything over and the coding was going well until it came to process ECU and instead of SG_CODIEREN for the job name I have CODIERDATEN_LESEN.

Can anyone point me in the right direction of how to change the job at this point? $540 has remained in the VO.

Cheers, Sam
Contact BR diagnostics a forum sponsor and speak to Craig (wibbles on the forum) and he may offer some help for a small fee. He’ll have it sorted in no time mate.

Good luck
Thanks again Twenny, I think I’ll have to before I mess anything up. He’s not too far from me anyway so I’ve dropped him an email

Cheers

Post Reply

Return to “How To's”